No. All colors are applied to the transfer including adhesive. You just have to apply the transfer.

Yes. However, you should not iron it, but press the motif on piece by piece. The optimal temperature is 150-160 degrees Celsius. Apply as much pressure as possible and DO NOT use steam.

Yes! Anyone can apply iron-on transfers. All you need is an iron and 5 minutes of time.

You can apply iron-on transfers almost anywhere. Suitable materials are:

Cotton, cotton blends, polyester fabrics, wool-silk jersey and many more. Use baking paper as protection when applying, especially if you are unsure!

I would advise against using wool felt or wool fleece, as there are too many air pockets in the fabric and the iron-on image does not get enough hold.

If you would like to use my iron-on transfers commercially, please contact me with your request!

Congratulations! In about 2 weeks you will be the owner of a unique design that is only available in small editions.

Yes. Iron-on transfers are extremely durable and can even be washed at up to 60°C. They can even survive the dryer on the lowest setting.

Nevertheless, if you want to enjoy your iron-on image for longer, wash it at 40°C and do not use the dryer.

Then you have not applied your iron-on image evenly. Cover the iron-on image with baking paper and press the motif firmly again. Your iron-on image should now look like new.