countercurrent swimmer iron-on transfer

[vc_row][vc_column][vc_column_text]

"I'm just swimming against the current"

Is a funny mixed media collage with puffer fish. A tribute to all those who celebrate individualism and want to show this on their clothing.

Enjoy an iron-on patch for adults

This iron-on image was produced in Austria using a special printing process. The result is a wafer-thin, elastic and incredibly colorful print that you can use on any type of textile, such as mixed fabrics, sportswear, functional clothing, jersey, French terry, sweat and many more.

No annoying weeding of the film!

The iron-on image can be applied to both dark and light textiles, as each motif is printed with a white color as a base. However, I recommend using it on plain fabrics so that no motifs bleed through. Once applied, your textile is washable at up to 60 degrees, tear-resistant and stretchable. You will find detailed instructions further down on this page and in printed form in the packaging.

size of the collage

Iron-on patch dimensions: 23 cm x 13.5 cm Info: The size representation on the wearing image may vary. The exact dimensions can be found in the product description and the second product image![/vc_column_text][vc_separator][vc_column_text]

Care instructions:

Please wait 24 hours before washing your work so that the motif is properly fixed. Once applied, your textile is washable at up to 60 degrees, tear-resistant and stretchable. * To protect your motif and your fabric, you can use baking paper as an intermediate layer. ** If you have problems applying the material, reduce the temperature. Work slowly, piece by piece, until your entire design has been pressed. Also note that with synthetic fabrics you need to work at a lower temperature to avoid damaging your fabric and you may have to repeat the steps.[/vc_column_text][/vc_column][/vc_row][vc_row general_row_align="zass-align-center" css=".vc_custom_1679000652293{margin-top: 40px !important;margin-bottom: 40px !important;border-top-width: 0px !important;padding-top: 20px !important;padding-bottom: 40px !important;background-color: #e2cdc0 !important;background-position: center !important;background-repeat: no-repeat !important;background-size: cover !important;}"][vc_column width="1/4"][vc_hoverbox image="3802" primary_title="" hover_title=""]For light and dark textiles![/vc_hoverbox][/vc_column][vc_column width="1/4"][vc_hoverbox image="3807" primary_title="" hover_title=""]

iron setting 2

(130 - 160 °C)

Iron Temp. 2

[/vc_hoverbox][/vc_column][vc_column width="1/4"][vc_hoverbox image="3808" primary_title="" hover_title=""]

Press for 10 - 20 seconds

Press for 10 - 12 seconds

You can also press for 10 seconds and then press again for 10 seconds[/vc_hoverbox][/vc_column][vc_column width="1/4"][vc_hoverbox image="3810" primary_title="" hover_title=""]

washable at up to 60°C

Tumble dry (gentle cycle)

If you want to enjoy your iron-on image for a long time, I recommend not using fabric softener![/vc_hoverbox][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

step-by-step instructions

[/vc_column_text][vc_tta_pageable no_fill_content_area="true" autoplay="20" active_section="1" pagination_style="flat-rounded" pagination_color="turquoise"][vc_tta_section title="Step 1" tab_id="1678996296778-c6dd0a2b-d80c"][vc_column_text]

Step 1

[en]Pre-wash your textile without fabric softener. Then pre-iron your textile without steam to remove any residual moisture.

[en] First wash your textile without fabric softener. Then iron your textile without steam to remove residual moisture.

[/vc_column_text][/vc_tta_section][vc_tta_section title="Section" tab_id="1678998356609-cb67afc5-ecc0"][vc_column_text]

[en] Press your textile on the table or floor!

[en] Press the design at the table or at the floor.

[/vc_column_text][/vc_tta_section][vc_tta_section title="Step 2" tab_id="1678996296783-a73da0c3-32e4"][vc_column_text]

Step 2

[en]Heat your iron to 130°C - 160°C.

Place the iron-on image with the transfer foil facing upwards on your textile and press the motif on piece by piece with a little pressure (approx. 10-20 seconds each).

[en]Heat your iron to 130°C - 160°C.

Place the iron-on transfer with the transfer film facing upwards on your textile and press the design with pressure, piece by piece (about 10-20 seconds each).

Tip: You can cover the iron-on image with baking paper before pressing it on to protect your fabric and the image.

[en] For added safety, you can cover the  Iron On Picture with baking paper before pressing.

[/vc_column_text][/vc_tta_section][vc_tta_section title="Step 3" tab_id="1678996717414-e458cc7c-7d65"][vc_column_text]

Step 3

[en]Then let the iron-on image cool down completely before removing the transfer film.

[en]Afterwards, allow the iron-on transfer to cool completely before removing the transfer film.

[en] Only wash your textile after it has rested for 24 hours. After the resting time, your new work can be washed inside out at up to 60°C and can be tumble dried (gentle cycle).

[en] Wash your textile after a rest period of 24 hours. After 24 hours, your new creation can be washed inside out at up to 60°C and is suitable for tumble drying (gentle cycle).

[/vc_column_text][/vc_tta_section][/vc_tta_pageable][/vc_column][/vc_row][vc_row][vc_column][vc_video link="https://youtu.be/Gm8v4xCs9XU" title="Video Instructions"][/vc_column ][/vc_row]